![]() You might have to repeat this step for a third coat of poly.Want to optimize your corner space with a personal touch? Check out one of these chic DIY Corner TV Stand Ideas and make your room stand out! Lightly sand and give it another coat of ply. After the stain is dry cover everything with polyurethane.ġ0. Give everything a light sanding with 220 grit sandpaper.ĩ. Add the veneer edge banding to the front to cover the ugly edges of the plywood.ħ. Flip the box over and attach the leg brackets, then add the legs.Ħ. Attach the underlayment to the back of the box you already made.ĥ. You can center them or do what I did and make the top shelf slightly narrower than the bottom.Ĥ. The 48 inches are the top and bottom pieces and the 22 1/2 inch pieces are the three vertical pieces.ģ.Now attach the last pieces of plywood to the middle shelf. Drill pilot holes with the Kreg Jig and connect the Three pieces that are 22 1/2 inch to the 48 inch pieces. Have your wood cut at the hardware store to these specificationsĢ pieces of 3/4 inch plywood at 48" by 18"Ģ pieces of 3/4 inch plywood at 22 7/8" by 18"ģ pieces of 3/4 inch plywood at 22 1/2" by 18"Ģ. ![]() The three pieces at 22 1/2 will be the vertical pieces and the underlayment is the back. The 2 pieces at 22 7/8 will be the middle horizontal shelf. The 2 longer pieces will be the top and bottom of your tv stand. 3 pieces of 3/4 inch plywood at 22 1/2″ by 18″.2 pieces of 3/4 inch plywood at 22 7/8″ by 18″. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |